Sealey RE83/4 Manuale Utente Scaricare il pdf

SUPERSNAP® BODY REPAIR KIT

MODEL No: RE83/4

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

2. CONTENT

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

p WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.

3 Familiarise yourself with product application and limitations, as well as the specific potential hazards peculiar to the repair kit.

p WARNING! No part of this unit or any accessory relating to the repair kit is designed for lifting loads. It is intended only as a

pushing device and must be used as such, with care.

p WARNING! Disconnect the repair kit from the hydraulic pump before servicing or performing any maintenance on the unit.

3 Maintain repair kit in good order. Replace/repair with genuine parts only. Non-genuine parts may be dangerous and will invalidate the warranty.

3 Use qualified person to lubricate and maintain the hydraulic pump. DO NOT use brake fluid to top up hydraulic unit. Use Sealey hydraulic oil only.

3 Keep the repair kit clean for best and safest performance.

p WARNING! Ensure you know how much load you are pushing. Never exceed the maximum pushing capacity.

3 Use only with the supplied Sealey hydraulic pump and accessories. Wrong equipment may damage unit and invalidate your warranty.

3 The kit accessories may be used with other popular makes of kit.

3 Ensure there is positive engagement of repair kit accessories to the vehicle body before pushing.

3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

3 If working on an ‘off centre’ load, pump with care. If you feel undue resistance, stop and re-adjust the set-up.

p WARNING! Keep your hands, body and clothing away from the repair kit and accessories when in use. Take any necessary

precautions to protect your personal safety whilst using the repair kit.

3 Ensure the hydraulic hose is not bent or kinked but laid out correctly.

3 Keep non-essential persons away from the operating area. Be aware of the locations of other persons assisting you.

3 When releasing tension from the load be sure to undo the hydraulic valve VERY slowly.

7 DO NOT operate the repair kit if any parts are damaged or missing as this may cause failure and/or personal injury.

p WARNING! DO NOT use repair kit as a lifting device of any type. DO NOT use for any purpose other than for which it is designed.

7 DO NOT over extend the ram as the plunger may be forced out of the ram end.

7 DO NOT heat accessories as this may weaken them.

7 DO NOT modify accessories for use with this kit.

3 When not in use, place dust cap in end of hydraulic hose and store the kit, in the case, in a safe, dry, childproof location.

Only fully trained and qualified persons should use this equipment. These instructions are not a substitute for user receiving full

supervised training by a qualified person. It is important the user understands the applications, limitations and potential hazards of

the product.

RE83/4 4 ton capacity kit

ITEM PART NO. DESCRIPTION

1 604/1 METAL BOX

A2 604/A2 21” SUPERSNAP

TUBING

A3 604/A3 18” SUPERSNAP

TUBING

A4 604/A4 10” SUPERSNAP

TUBING

A5 604/A5 6-1/2” SUPERSNAP

TUBING

A6 604/A6 3-1/4” TUBE ADAPTOR

7 604/7 SERRATED SADDLE

8 604/8 MALE CONNECTOR

A9 604/A9 MALE ADAPTOR

A10 604/A10 FEMALE ADAPTOR

11 604/11 SPREADER RAM

12 604/12 2-3/4” RUBBER HEAD

13 604/13 FLAT BASE

14 604/14 SPREADER RAM TOE

15 604/15 SPREADER PLUNGER TOE

16 604/16 WEDGE HEAD

17 604/17 90

V-BASE

40 604/40 10 TON HYDRAULIC UNIT

41 604/41 RAM

42 604/42 HOSE

Original Language Version

RE83/4 Issue: 4 - 26/03/10

1 2 3 4

Sommario

Pagina 1 - ® BODY REPAIR KIT

SUPERSNAP® BODY REPAIR KITMODEL No: RE83/4 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used accor

Pagina 2 - 4. ASSEMBLY

Illustrated below are the main attachment variationsEnsure the task you are undertaking falls within the capacity of the pump and accessories you are

Pagina 3 - 4. INSTRUCTIONS

4. INSTRUCTIONSp WARNING! Ensure you have read and understood chapter 1 safety instructions.Note: These instructions are intended to provide a gui

Pagina 4 - 5. MAINTENANCE

IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE PUMP AND/OR RAM.Hydraulic products are only repaired by local service agents. We hav

Commenti su questo manuale

Nessun commento

Sealey RE83/4 Manuale Utente

Navigare online o scaricare Manuale Utente per Attrezzi Sealey RE83/4. Sealey RE83/4 User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Attrezzi Sealey RE83/4